Hỗ trợ trực tuyến
0901401486
Phòng Kinh Doanh - 0901401486
sales@ketnoimang.vn
Hỗ trợ kỹ thuật
0901401486
-
cs@ketnoimang.vn
Facebook
Xem nhiều nhất
Thiết bị chuyển mạch Cisco Catalyst 9300 Deep Buffer 24-port UPOE switch, with Network Essentials

Thiết bị chuyển mạch Cisco Catalyst 9300 Deep Buffer 24-port UPOE switch, with Network Essentials

P/N: C9300-24UB-E
Thông tin chung:

Cisco Catalyst 9300 Deep Buffer 24-port UPOE switch, with Network Essentials


Liên hệ ngay
09 014 014 86


 

Built for security, IoT, mobility, and cloud

The Cisco® Catalyst® 9300 Series switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At up to 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

The Catalyst 9300 Series is designed for Cisco StackWise® technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower®, which delivers high-density Cisco Universal Power over Ethernet (Cisco UPOE®) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access™ Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, Cisco IOS® XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence.

The Foundation of Software-Defined access

Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services.

The Cisco Digital Network Architecture (Cisco DNA) with Software-Defined Access (SD-Access) is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include:

  • Simplified device deployment
  • Unified management of wired and wireless networks
  • Network virtualization and segmentation
  • Group-based policies
  • Context-based analytics

Cisco DNA software

Cisco DNA Software offers a valuable and flexible way to buy software for the access, WAN, and data center domains. At each stage in the product lifecycle, Cisco DNA Software helps make buying, managing, and upgrading your network and infrastructure software easier. Cisco DNA Software provides:

  • Flexible licensing models to smoothly distribute customers’ software spending over time
  • Investment protection for software purchases through software services–enabled license portability
  • Access to updates, upgrades, and new technology from Cisco through Cisco®Software Support Services (SWSS)
  • Lower cost of entry with the new Cisco DNA Subscription for Switching model

Cisco DNA lets you manage your entire switching structure as a single, converged component. With one management system and one policy for wired and wireless networks, it offers an efficient way to provide more secure access.

Product overview: Features

Product highlights

  • Highest wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models
  • Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries
  • x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an option SSD drive) to host containers
  • USB 2.0 slot to load system images and set configurations
  • Up to 480 Gbps of local stackable switching bandwidth
  • Deeper buffer and higher scale model options for rich multi-media content delivery applications
  • Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of fixed or modular uplinks
  • Easy transition from 10G to 25G with dual-rate optics
  • Flexible downlink options with 1G Copper and Fiber as well as Multigigabit links
  • Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+
  • Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy
  • Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
  • IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
  • Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration
  • IEEE 802.1ba AV Bridging (AVB) built in to provide a better audio and video experience through improved time synchronization and QoS
  • Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network
  • Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against runtime attacks
  • SD-Access: Cisco Catalyst 9300 Series switches form the foundational building block for SD-Access, Cisco’s lead enterprise architecture:
    • Policy-based automation from edge to cloud
    • Simplified segmentation and micro-segmentation, with predictable performance and scalability
    • Automation through Cisco DNA Center
    • Policy handled through the Cisco Identity Services Engine (ISE)
    • Network assurance provided through the Cisco DNA Center
    • Faster launch of new business services and significantly improved issue resolution time
  • SD-Access Embedded Wireless: The Cisco Catalyst 9800 embedded Wireless Controller Software package can be installed on Cisco Catalyst 9300 Series switches to enable wireless controller functionality for distributed branches and small campuses. Once installed, the Catalyst 9800 embedded Wireless Controller running on a Catalyst 9300 Series switch can support up to 200 APs and 4000 Clients. A maximum two wireless controllers can be enabled per site on two different Catalyst 9300 Series switches which will increase to scale up to 200 APs and 4000 Wireless Clients. The Catalyst 9800 embedded Wireless Controller Software package will enable wireless functionality only for SD-Access deployments with two supported topologies:
    • The Catalyst 9800 embedded Wireless Controller Software package can be enabled on Catalyst 9300 Series switches functioning as Co-Located Border and Control Plane
    • C9800 Wireless Software Package can be enabled on Catalyst 9300 Series switches functioning as Fabric in a Box
  • Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network
  • Advanced security
    • Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take actions toward threats or anomalies in your network, including malware detection in encrypted traffic (without decryption) and distributed anomaly detection
    • Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
    • Trustworthy solutions: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software

Platform details

Switch models and configurations

Models

FRU Power Supply

FRU Fans

Modular Uplinks

Stacking Bandwidth Support

Cisco StackPower

Catalyst 9800 Embedded WLC

SD-Access Support

Modular uplink models (C9300 SKUs)

480 Gbps

Yes (200 APs)

Yes (256 Virtual Networks)

Fixed uplink Models (C9300L SKUs)

320 Gbps

Yes (50 APs)

Yes (64 Virtual Networks)


The Cisco Catalyst 9300 Series is made up of eleven modular uplink switch models and ten fixed uplink switch models.

Cisco Catalyst 9300 Series switches

Model

Total 10/100/1000, Multigigabit copper or SFP Fiber

Uplink Configuration

Default AC power supply

Available PoE power

Modular uplink models

C9300-24T

24 Data

Modular Uplinks

350W AC

N/A

C9300-48T

48 Data

Modular Uplinks

350W AC

N/A

C9300-24P

24 POE+

Modular Uplinks

715W AC

445W

C9300-48P

48 POE+

Modular Uplinks

715W AC

437W

C9300-24U

24 Cisco UPOE

Modular Uplinks

1100W AC

830W

C9300-48U

48 Cisco UPOE

Modular Uplinks

1100W AC

822W

C9300-24UX

24 Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps)

Modular Uplinks

1100W AC

560W

C9300-48UXM

36x 100 Mbps,1G, 2.5G + 12x Multigigabit (100M, 1G, 2.5G, 5G, or 10 Gbps)

Modular Uplinks

1100W AC

490W

C9300-48UN

48x 5 Gbps UPOE ports (100M, 1G, 2.5G, 5G)

Modular Uplinks

1100W AC

645W

C9300-24UB

24 Cisco UPOE

Modular Uplinks

1100W AC

830W

C9300-24UXB

24 Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps)

Modular Uplinks

1100W AC

560W

C9300-48UB

48 Cisco UPOE

Modular Uplinks

1100W AC

822W

C9300-24S

24x 1G SFP

Modular Uplinks

715W AC

N/A

C9300-48S

48x 1G SFP

Modular Uplinks

715W AC

N/A

Fixed uplink models

C9300L-24T-4G

24 Data

4x 1G fixed uplinks

350W

N/A

C9300L-24T-4X

24 Data

4x 10G fixed uplinks

350W

N/A

C9300L-48T-4G

48 Data

4x 1G fixed uplinks

350W

N/A

C9300L-48T-4X

48 Data

4x 10G fixed uplinks

350W

N/A

C9300L-24P-4G

24 PoE+

4x 1G fixed uplinks

715W*

505W

C9300L-24P-4X

24 PoE+

4x 10G fixed uplinks

715W*

505W

C9300L-48P-4G

48 PoE+

4x 1G fixed uplinks

715W*

505W

C9300L-48P-4X

48 PoE+

4x 10G fixed uplinks

715W*

505W

* Upgrade option for 1100W PSU is available

Cisco Catalyst 9300 Series Network Modules

Cisco Catalyst 9300 Series Network Modules

Network module

Description

C9300-NM-4G

Catalyst 9300 Series 4x 1G Network Module

C9300-NM-4M

Catalyst 9300 Series 4x Multigigabit Network Module

C9300-NM-8X

Catalyst 9300 Series 8x 10G Network Module

C9300-NM-2Q

Catalyst 9300 Series 2x 40G Network Module

C9300-NM-2Y

Catalyst 9300 Series 2x 25G Network Module

Power supplies

Cisco Catalyst 9300 Series switches support dual redundant power supplies. The switches ship with one power supply by default, and the second power supply can be purchased when the switch is ordered or at a later time. If only one power supply is installed, it should always be in power supply bay #1. The switches also ship with three field-replaceable fans.

Cisco Catalyst 9300 Series Dual Redundant power supplies

Model

Default power supply

Available PoE power

With 350W Secondary PS

With 715W Secondary PS

With 1100W Secondary PS

C9300-24T

PWR-C1-350WAC***

n/a

n/a

n/a

n/a

C9300-48T

PWR-C1-350WAC***

n/a

n/a

n/a

n/a

C9300-24P

PWR-C1-715WAC***

445W

720W*

720W*

720W*

C9300-48P

PWR-C1-715WAC***

437W

787W

1152W

1440W*

C9300-24U

PWR-C1-1100WAC

830W

1180W

1440W*

1440W*

C9300-48U

PWR-C1-1100WAC

822W

1172W

1537W

1800W**

C9300-24UX

PWR-C1-1100WAC-P

560W

910W

1275W

1440W*

C9300-48UXM

PWR-C1-1100WAC-P

490W

840W

1205W

1590W

C9300-48UN

PWR-C1-1100WAC-P

645W

995W

1360W

1745W

C9300-24UB

PWR-C1-1100WAC

830W

1180W

1440W*

1440W*

C9300-24UXB

PWR-C1-1100WAC-P

560W

910W

1275W

1440W*

C9300-48UB

PWR-C1-1100WAC

822W

1172W

1537W

1800W**

C9300-24S

PWR-C1-715WAC-P

n/a

n/a

n/a

n/a

C9300-48S

PWR-C1-715WAC-P

n/a

n/a

n/a

n/a

C9300L-24T-4G

PWR-C1-350WAC-P

n/a

n/a

n/a

n/a

C9300L-24T-4X

PWR-C1-350WAC-P

n/a

n/a

n/a

n/a

C9300L-48T-4G

PWR-C1-350WAC-P

n/a

n/a

n/a

n/a

C9300L-48T-4X

PWR-C1-350WAC-P

n/a

n/a

n/a

n/a

C9300L-24P-4G

PWR-C1-715WAC-P

505W

720W*

720W*

720W*

C9300L-24P-4X

PWR-C1-715WAC-P

505W

720W*

720W*

720W*

C9300L-48P-4G

PWR-C1-715WAC-P***

505W

855W

1220W

1440W*

C9300L-48P-4X

PWR-C1-715WAC-P***

505W

855W

1220W

1440W*

* Limited by port number and port rating (e.g. 24 PoE+ 30W ports = 720W)

** Limited by design

*** Upgrade options for 715W and 1100W PSU are available


Stacking

Cisco Catalyst 9300 Series switch models are designed for stacking switches as a single virtual switch, enabling customers to have a single management plane and control plane for up to 448 access ports.

Cisco Catalyst 9300 Series modular uplink models stack (C9300 SKUs) and fixed uplink models stack (C9300L SKUs)

Model

Stacking support

Stacking bandwidth support

Optional Stacking hardware

Number of members

Supported stack members

Modular uplink models (C9300 SKUs)

StackWise®-480

480 Gbps

StackWise Cable

8

Other C9300 SKUs with same license level

Fixed uplink models (C9300L SKUs)

StackWise-320

320 Gbps

C9300L-STACK-KIT

8

Other C9300L SKUs with same license level

Mixed stacking between C9300 and C9300L SKUs are not supported. You cannot stack fixed uplink models (C9300L SKUs) with modular uplink models (C9300 SKUs) or other Catalyst switches, e.g. Cisco Catalyst 3850 and 3650 Series. Any combination of C9300 models can form a stack. Separately, any combination of C9300L models can form a stack.

The StackWise cables that are available to configure stacking with Catalyst 9300 Series modular uplink models (C9300 SKUs) come in lengths of 0.5m, 1m and 3m.

The optional StackWise-320 kit for Catalyst 9300 Series fixed uplink models (C9300L SKUs) consists of two stack adapters and a stacking cable. The default stacking cable is 0.5 m, but options of 1m and 3m are also available. Table 5 lists the stacking accessories.

Stacking accessories

Model

Description

STACK-T1-50CM

Data stack 50 cm (cable option with C9300 SKUs)

STACK-T1-1M

Data stack 1m (cable option with C9300 SKUs)

STACK-T1-3M

Data stack 3m (cable option with C9300 SKUs)

C9300L-STACK-KIT

Stack kit for C9300L SKUs only: Two data stack adapters and one data stack cable

STACK-T3-50CM

Data stack 50cm cable (default cable with C9300L Stack Kit)

STACK-T3-1M

Data stack 1m cable (cable option with C9300L Stack Kit)

STACK T3-3M

Data stack 3m cable (cable option with C9300L Stack Kit)

Cisco Catalyst 9300 Series switch stack units

Fan

Cisco Catalyst 9300 Series switches also come with three field-replaceable fans and support (N+1) redundancy. Table 6 lists the fan module part number.

Model

Description

FAN-T2=

Fan module

Performance and scalability

Description

Performance – C9300 modular uplink SKUs

Performance – C9300 higher scale, modular uplink SKUs

Performance: C9300L fixed uplink SKUs

Total number of MAC addresses

32,000

64,000

32,000

Total number of IPv4 routes (ARP plus learned routes)

32,000 (24,000 direct routes and 8000 indirect routes)

64,000

32,000 (24,000 direct routes and 8000 indirect routes)

IPv6 routing entries

16,000

32,000

16,000

Multicast routing scale

8,000

16,000

8,000

QoS scale entries

5,120

18,000

5,120

ACL scale entries

5,120

18,000

5,120

Packet buffer per SKU

16 MB buffer for 24- or 48-port Gigabit Ethernet models

32 MB buffer for 24 and 48-port Multigigabit

32 MB buffer for 24- and 48-port Gigabit Ethernet models

64 MB buffer for 24-port Multigigabit model (24UXB)

16 MB buffer for 24 and 48 port Gigabit Ethernet models

FNF entries

64,000 flow on 24- and 48-port Gigabit Ethernet models

128,000 flows on 24-port Multigigabit

128,000 flow on 24- and 48-port Gigabit Ethernet models

256,000 flows on 24-port Multigigabit

64,000 flow on 24- and 48-port Gigabit Ethernet models

 

DRAM

8 GB

16 MB

8 GB

Flash

16 GB

16 GB

16 GB

VLAN IDs

4094

4094

4094

Total Switched Virtual Interfaces (SVIs)

1000

4094

1000

Jumbo frames

9198 bytes

9198 bytes

9198 bytes

Total routed ports per Catalyst 9300 Series stack

448

448

416

Bandwidth specifications

SKU

Switching capacity

Switching capacity with stacking

Forwarding rate

Forwarding rate with stacking

C9300-24T

208 Gbps

688 Gbps

154.76 Mpps

511.90 Mpps

C9300-48T

256 Gbps

736 Gbps

190.47 Mpps

547.62 Mpps

C9300-24P

208 Gbps

688 Gbps

154.76 Mpps

511.90 Mpps

C9300-48P

256 Gbps

736 Gbps

190.47 Mpps

547.62 Mpps

C9300-24U

208 Gbps

688 Gbps

154.76 Mpps

511.90 Mpps

C9300-48U

256 Gbps

736 Gbps

190.48 Mpps

547.62 Mpps

C9300-24UX

640 Gbps

1120 Gbps

476.19 Mpps

833.33 Mpps

C9300-48UXM

580 Gbps

1060 Gbps

431.54 Mpps

788.69 Mpps

C9300-48UN

640 Gbps

1120 Gbps

476.19 Mpps

833.33 Mpps

C9300-24UB

208 Gbps

688 Gbps

154.76 Mpps

511.90 Mpps

C9300-48UB

256 Gbps

736 Gbps

190.48 Mpps

547.62 Mpps

C9300-24UXB

640 Gbps

1120 Gbps

476.19 Mpps

833.33 Mpps

C9300-24S

208 Gbps

688 Gbps

154.76 Mpps

511.90 Mpps

C9300-48S

256 Gbps

736 Gbps

190.47 Mpps

547.62 Mpps

C9300L-24T-4G

56 Gbps

376 Gbps

41.66 Mpps

279.76 Mpps

C9300L-24T-4X

128 Gbps

448 Gbps

95.23 Mpps

333.33 Mpps

C9300L-48T-4G

104 Gbps

424 Gbps

77.38 Mpps

315.48 Mpps

C9300L-48T-4X

176 Gbps

496 Gbps

130.95 Mpps

369.05 Mpps

C9300L-24P-4G

56 Gbps

376 Gbps

41.66 Mpps

279.76 Mpps

C9300L-24P-4X

128 Gbps

448 Gbps

95.23 Mpps

333.33 Mpps

C9300L-48P-4G

104 Gbps

424 Gbps

77.38 Mpps

315.48 Mpps

C9300L-48P-4X

176 Gbps

496 Gbps

130.95 Mpps

369.05 Mpps

All models are at wire-speed nonblocking performance for both IPv4 and IPv6. The forwarding rates in the table above are measured with 64 byte IPv4 packet sizes.

SD-Access architecture

What if you could give time back to IT? Provide network access in minutes for any user or device to any application – without compromise? SD-Access is the industry’s first policy-based automation from network edge to cloud. Your foundation for your digital network, Cisco SD-Access. Built on the principles of the Cisco DNA, SD-Access provides end-to-end segmentation to keep user, device and application traffic separate without a redesign of the network. It automates user access policy so organizations can make sure the right policies are set for any user or device with any application across the network. This is accomplished with a single network fabric across LAN and WLAN which creates a consistent user experience anywhere without compromising on security.

There are many challenges today in managing the network to drive business outcomes. These limitations are due to manual configuration and fragmented tool offerings. SD-Access provides:

  • A transformational management solution that reduces operational expenses and enhances business agility
  • Consistent management of wired and wireless network provisioning and policy
  • Automated network segmentation and group-based policy
  • Contextual insights for fast issue resolution and capacity planning
  • Open and programmable interfaces for integration with third-party solutions

Platform benefits

  • Cisco IOS XE opens a completely new paradigm in network configuration, operation, and monitoring through network automation. Cisco’s automation solution is open, standards-based, and extensible across the entire lifecycle of a network device. The various automation mechanisms are outlined below.
  • Automated device provisioning is the ability to automate the process of upgrading software images and installing configuration files on Cisco Catalyst switches when they are being deployed in the network for the first time. Cisco provides both turnkey solutions such as Plug and Play and off-the-shelf tools such as Zero-Touch Provisioning (ZTP) and Preboot Execution Environment (PXE) that enable an effortless and automated deployment.
  • API-driven configuration is available with modern network switches such as the Cisco Catalyst 9300 Series. It supports a wide range of automation features and provides robust open APIs over NETCONF and RESTCONF and GNMI using YANG data models for external tools, both off-the-shelf and custom built, to automatically provision network resources.
  • Granular visibility enables model-driven telemetry to stream data from a switch to a destination. The data to be streamed is identified through subscription to a data set in a YANG model. The subscribed data set is streamed to the destination at specified intervals. Additionally, Cisco IOS XE enables the push model. It provides near-real-time monitoring of the network, leading to quick detection and rectification of failures.
  • Seamless software upgrades and patching supports OS resilience. Cisco IOS XE supports patching, which provides fixes for critical bugs and security vulnerabilities between regular maintenance releases. This support lets you add patches without having to wait for the next maintenance release.

Security

  • Encrypted Traffic Analytics (ETA) is a unique capability for identifying malware in encrypted traffic coming from the access layer. Since more and more traffic is becoming encrypted, the visibility this feature affords for threat detection is critical for keeping your network secure at different layers.
  • AES-256 MACsec encryption is the IEEE 802.1AE standard for authenticating and encrypting packets between switches. The Cisco Catalyst 9300 Series switches support 256-bit and 128-bit Advanced Encryption Standard (AES), providing the most secure link encryption.
  • Trustworthy solutions built with Cisco Trust Anchor Technologies provide a highly secure foundation for Cisco products. With the Catalyst 9300 Series, these technologies enable hardware and software authenticity assurance for supply chain trust and strong mitigation against man-in-the-middle attacks that compromise software and firmware. Trust Anchor capabilities include:
    • Image signing: Cryptographically signed images provide assurance that the firmware, BIOS, and other software are authentic and unmodified. As the system boots, the system’s software signatures are checked for integrity.
    • Secure Boot: Cisco Secure Boot technology anchors the boot sequence chain of trust to immutable hardware, mitigating threats against a system’s foundational state and the software that is to be loaded, regardless of a user’s privilege level. It provides layered protection against the persistence of illicitly modified firmware.
    • Cisco Trust Anchor module: A tamper-resistant, strong cryptographic, single-chip solution provides hardware authenticity assurance to uniquely identify the product so that its origin can be confirmed to Cisco. This provides assurance that the product is genuine.

Resiliency and high availability

  • StackWise-480: Cisco Catalyst 9300 Series modular uplink models (C9300 SKUs) support the industry’s highest back-panel stacking bandwidth solution (480 Gbps) with StackWise-480. Up to 8 Switches can be configured in a Stackwise-480 with the special connector at the back of the switch using dedicated stack cables.
  • StackWise-320: The Cisco Catalyst 9300 Series fixed uplink models (C9300L SKUs) support stacking bandwidth solution (320 Gbps) with StackWise-320. Up to 8 Switches can be optionally configured in a Stackwise-320 with the special Stack Kit at the back of the switch using dedicated stack cables.
  • Cisco StackPower: Cisco StackPower is an innovative power interconnect system that allows the power supplies in a stack to be shared as a common resource among all the switches. This allows you to simply add one extra power supply in any switch of the stack and either provide power redundancy for any of the stack members or simply add more power to the shared pool. Up to 4 switches can be configured in a StackPower stack with the special connector at the back of the switch. However, with the use of XPS-2200 appliance, up to 9 switches can be configured in the StackPower stack. Cisco StackPower is only supported on the models with modular uplink stack - C9300 SKUs.

Cisco Catalyst 9300 Series StackPower

  • High availability: The Catalyst 9300 Series supports high-availability features, including the following:
    • Cross-stack EtherChannel provides the ability to configure Cisco EtherChannel technology across different members of the stack for high resiliency.
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) provides rapid spanning tree convergence independent of spanning tree timers and also offers the benefit of Layer 2 load balancing and distributed processing.
    • Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning tree (IEEE 802.1w) reconvergence on a per-VLAN spanning tree basis, providing simpler configuration than MSTP. In both MSTP and PVRST+ modes, stacked units behave as a single spanning tree node.
    • Switch-port auto-recovery (“err-disable” recovery) automatically attempts to reactivate a link that is disabled because of a network error.
    • The Catalyst 9300 Series platform delivers the best NSF/SSO resiliency architecture in a stackable solution with sub-50-ms failover.
    • Always-On wireless network with stateful switchover when wireless functionality is enabled on stack of Catalyst 9300 Series switches.

Deep buffer Technology

Cisco Catalyst 9300 higher scale models have a deeper buffer to address the requirements of rich multi-media lossless content delivery and large routing tables in a fixed access solution with a wide range of uplink choices for deployment flexibility.

Flexible Netflow

Flexible NetFlow (FNF): Cisco IOS Software FNF is the next generation in flow visibility technology. It enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection with increased flexibility and scalability. The Catalyst 9300 Series is capable of up to 64,000 flow entries on 48-port and 24 port models and up to 128,000 flow entries on Multigigabit models.

Application visibility and control

NBAR2: Next-Generation Network-Based Application Recognition (NBAR2) enables advanced application classification techniques, accuracy with up to 1400 predefined and well-known application signatures and up to 150 encrypted applications on the Cisco Catalyst 9000 switches. The most popular applications included are Skype, Office 365, Microsoft Lync, Cisco WebEx®, and Facebook, among many others that are predefined and easy to configure. NBAR2 provides the network administrator with an important tool to identify, control, and monitor end-user application usage while helping ensure a quality user experience and securing the network from malicious attacks. NBAR2 leverages FNF to report application performance and activities within the network to any supported NetFlow collector, such as Cisco Prime®, Cisco Stealthwatch®, or any compliant third-party tool.

QoS

Superior QoS: The Cisco Catalyst 9300 Series offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed. Industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed. Superior QoS includes granular wireless bandwidth management and fair sharing, 802.1p Class of Service (CoS) and Differentiated Services Code Point (DSCP) field classification, Shaped Round Robin (SRR) scheduling, Committed Information Rate (CIR), and eight egress queues per port.

Service discovery

Multicast DNS (mDNS) gateway: This service discovery gateway capability facilitates sharing of services advertised using the Apple mDNS (Bonjour) protocol, such as printers, Apple TVs, and file services across the network. Additionally, the administrator can create policies defining which services can be seen and accessed by the users in the network. This capability facilitates a Bring-Your-Own-Device (BYOD) rollout.

Smart operation

  • WebUI: WebUI is an embedded GUI-based device-management tool that provides the ability to provision the device, to simplify device deployment and manageability, and to enhance the user experience. It comes with the default image, so there is no need to enable anything or install any license on the device. You can use WebUI to build configurations, and to monitor and troubleshoot the device without having CLI expertise.
  • Efficient switch operation*: Cisco Catalyst 9300 Series switches provide optimum power saving with Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state. Other efficient switch operation features are as follows:
    • Per-port power consumption command allows customers to specify a maximum power setting on an individual port.
    • Per-port PoE power sensing measures actual power being drawn, enabling more intelligent control of powered devices. The PoE MIB provides proactive visibility into power usage and allows you to set different power-level thresholds.
  • RFID tags: Catalyst 9300 Series switches have an embedded RFID tag that facilitates easy asset and inventory management using commercial RFID readers.
  • Blue beacon: Catalyst 9300 Series switches support a blue beacon LED for easy identification of the switch being accessed.

* Energy Efficient Ethernet (EEE) will be fully supported on Multigigabit switches in a future SW release

High-Performance IP routing

The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in Cisco Catalyst 9300 Series switches, based on:

  • IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack. Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.
  • Advanced IP unicast routing protocols (including Full [OSPF], Enhanced Interior Gateway Routing Protocol [EIGRP], Border Gateway Protocol Version 4 [BGPv4], and Intermediate System-to-Intermediate System Version 4 [IS-ISv4]) are supported for load balancing and for constructing scalable LANs. IPv6 routing (using OSPFv3 and EIGRPv6) is supported in hardware for maximum performance.
  • Protocol-Independent Multicast (PIM) for IP multicast routing is supported, including PIM Sparse Mode (PIM SM), and Source-Specific Multicast (SSM).
  • IPv6 addressing is supported on interfaces with appropriate show commands for monitoring and troubleshooting.

Audio Video Bridging (AVB)

Starting with Cisco IOS XE Software Release 16.8, the Cisco Catalyst 9300 Series supports the IEEE 802.1 AVB standard. This standard provided the means for highly reliable delivery of low-latency, time-synchronized audio and video streaming services through Layer 2 Ethernet networks. The standard also makes it easier to integrate new services and for AV equipment from different vendors to interoperate.

Benefits

  • Improves quality of experience by lowering jitter and latency for time-synchronized delivery of high-quality AV.
  • Provides scalability of applications across networked deployments, including expansive and complex AV infrastructure.
  • Lowers Total Cost of Ownership (TCO) with reduced cabling (lowers CapEx) and no license fees (lowers OpEx).

Multigigabit Ethernet technology: Cisco Multigigabit Ethernet technology allows you to achieve bandwidth speeds from 1 Gbps to 10 Gbps over traditional Category 5e/6 cabling or above. This technology addresses the need for exponential increases in bandwidth with the enormous growth of 802.11ac Wave 2, to be eclipsed by the growth of Wi-Fi 6 and new wireless applications without having to replace current cabling infrastructure.

Power over ethernet leadership

Cisco Universal Power over Ethernet (Cisco UPOE): PoE removes the need for wall sockets to power each PoE-enabled device and eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. Cisco UPOE extends the IEEE PoE+ standard to double the power per port to 60 watts. This facilitates delivery of network power to a broad range of devices requiring higher power, including virtual desktop terminals, IP turrets, compact switches, building management gateways, LED lights, wireless access points, and IP phones.

Catalyst 9300 Series modular uplink models (C9300 SKUs) supports Cisco UPoE or PoE+ and PoE, thereby addressing the largest range of network power needs. Catalyst 9300 fixed uplink models (C9300L SKUs) support PoE+ and PoE.

Power supply requirements for Catalyst 9300 Series modular uplink PoE/PoE+ models (C9300-xxP SKUs)

24-port PoE switch

48-port PoE switch

PoE on all ports (15.4W per port)

1 PWR-C1-715WAC/PWR-C1-715WAC-P/PWR-C1-715WDC

1 PWR-C1-1100WAC/PWR-C1-1100WAC-P or 2 PWR-C1-715WAC/PWR-C1-715WAC-P/PWR-C1-715WDC

PoE+ on all ports (30W per port)

1 PWR-C1-1100WAC/PWR-C1-1100WAC-P or 2 PWR-C1-715WAC/PWR-C1-715WAC-P/PWR-C1-715WDC

2 PWR-C1-1100WAC/PWR-C1-1100WAC-P or 1 PWR-C1-1100WAC/PWR-C1-1100WAC-P and 1 PWR-C1-715WAC/PWR-C1-715WAC-P/PWR-C1-715WDC

Power supply requirements for Catalyst 9300 Series UPOE models (C9300-xxU/UXM/UN SKUs)

 

24-port Cisco UPOE switch

48-port Cisco UPOE switch

48 and 24-port Multigigabit Cisco UPOE switch*

Cisco UPOE (60W per port) & IEEE 802.3bt type3 on all ports (24-port switch) or up to 30 ports (48-port switch)

1 PWR-C1-1100WAC/PWR-C1-1100WAC-P and 1 PWR-C1-715WAC/PWR-C1-715WAC-P/PWR-C1-715WDC

2 PWR-C1-1100WAC/PWR-C1-1100WAC-P

2 PWR-C1-1100WAC/PWR-C1-1100WAC-P

Power supply requirements for Catalyst 9300 Series fixed uplink PoE/PoE+ models (C9300L-xxP SKUs)

24-port PoE switch

48-port PoE switch

PoE on all ports (15.4W per port)

1 PWR-C1-715WAC-P/PWR-C1-715WDC

1 PWR-C1-1100WAC-P or 2 PWR-C1-715WAC-P

PoE+ on all ports (30W per port)

1 PWR-C1-1100WAC-P or 2 PWR-C1-715WAC-P/PWR-C1-715WDC

2 PWR-C1-1100WAC-P or 1 PWR-C1-1100WAC-P and 1 PWR-C1-715WAC-P/PWR-C1-715WDC

  • Perpetual PoE: With Perpetual PoE, the PoE power is maintained during a switch reload. This is important for IoT endpoints such as PoE-powered lights, so that there is no disruption during switch reboot.
  • Fast PoE: When power is restored to a switch, PoE starts delivering power to endpoints without waiting for the operating system to fully load, thereby speeding up the time for the endpoint to start up.

* C9300-48UN, C9300-24UX, C9300-48UXM are available with PWR-C1-1100WAC-P Platinum-rated power supply. Platinum-rated power supplies are more efficient, lowering operating power costs* PWR-C1-1100WAC-UP and PWR-C1-715WAC-UP Platinum-rated power supply upgrade options are available to upgrade the default AC power supply to 1100W or 715W

Software requirements

Cisco DNA Software for Access Switching is available for the Cisco Catalyst 9300 Series.

Cisco DNA Software for Access Switching offers comprehensive solutions for the enterprise campus and branch offices. Cisco DNA for Access Switching introduces a simpler and more economical way to deploy access, aggregation, and core switches across enterprise campus and branch locations.

The Cisco DNA Subscription for Switching offer delivers an unbound network on an open and extensible architecture to help you navigate the digital journey. This subscription offer simplifies the buying process and includes lower initiation costs and flexible terms. It includes: Cisco DNA Premier with full Cisco DNA capabilities and SD-Access, bundled with ISE Base, ISE Plus, and StealthWatch.

Cisco Catalyst 9300 Series switches run on Cisco IOS XE 16.5.1a release or later with the following exceptions. Catalyst 9300 Series 1G fiber models (C9300-xxS SKUs) are supported on Cisco IOS XE 16.11.1a release or later. Catalyst 9300 Series fixed uplink models (C9300L SKUs) are supported on Cisco IOS XE 16.11.1b release or later. These software releases includes all the features listed earlier in the Platform Benefits section.

Licensing

Packaging

The Cisco Catalyst 9000 family of switches introduces a new and simplified licensing package in the form of base and add-on licenses.

  • The perpetual licensing package includes the Network Essentials and Network Advantage licensing options that are tied to the hardware. Between them, the base licensing packages cover switching fundamentals, management automation, troubleshooting, and advanced switching features. These Network licenses are perpetual.
  • The subscription licensing package includes the Cisco DNA Essentials and Cisco DNA Advantage options. In addition to on-box capabilities, the features available with this package provide Cisco innovations on the switch, as well as on Cisco DNA Center. The Cisco DNA subscription licenses are mandatory at the time of configuration.

License consumption is easily determined by the package itself. While perpetual licenses are always permanent and without an expiration date, subscription licenses have to be purchased for a 3-, 5-, or 7-year term (and hence are also known as term-based licenses). Table 12 shows the combinations of perpetual and subscription licenses that must be purchased.

Licensing combinations

 

Cisco DNA Essentials

Cisco DNA Advantage

Cisco DNA Premier

Network Essentials

Yes

No

No

Network Advantage

No*

Yes

Yes

*At the time of Cisco DNA license renewal, the Cisco DNA Essentials license can be purchased to be used with Network Advantage

Managing licenses with Smart Accounts: Creating Smart Accounts by using the Cisco Smart Software Manager (SSM) enables you to manage your software licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notified of expiring subscription licenses that you want to renew.

You must order a Cisco DNA subscription term license in order to purchase a switch. When the license term expires, you can either renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to continue operating with the base license capabilities.

Both the base and add-on licenses are also available for a 90-day evaluation period. An evaluation license is activated temporarily, without purchase. An expired evaluation license cannot be reactivated after reload.

Note: It is not required to deploy Cisco DNA Center just to use one of the above packages

Network Essentials and Advantage package features

Features

Network Essentials

Network Advantage

Switch fundamentals
Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO

Advanced switch capabilities and scale
BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM-BIDIR,* IP SLA, OSPF

Network segmentation
VRF, VXLAN, LISP, SGT, MPLS, mVPN

Automation
NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python)

Telemetry and visibility
Model-driven telemetry, sampled NetFlow, SPAN, RSPAN

High availability and resiliency
Nonstop Forwarding (NSF), Graceful Insertion and Removal (GIR), Fast Software Upgrade (FSU), Software Patching (CLI Based)

IOT integration
AVB, PTP, CoAP

Security
MACsec-256

Cisco DNA Essentials and Advantage package features (add a section for other software support and add Prime, ISE and Stealthwatch support)

Features

Cisco DNA Essentials

Cisco DNA Advantage

Cisco DNA Premier

Switch features

Optimized network deployments
Cisco DNA Service for Bonjour

Advanced telemetry and visibility
Full Flexible NetFlow, EEM

Optimized telemetry and visibility
ERSPAN, AVC (NBAR2), app hosting (in containers/VMs), Wireshark

Advanced security
Encrypted Traffic Analytics (ETA)

Cisco DNA Center features

Day-0 network bring-up automation
Cisco Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding

Element management
Discovery, inventory, topology, software image, licensing, and configuration management

Element management
Patch management

Basic Assurance
Health dashboards – Network, Client, Application; switch and wired client health monitoring

SD-Access

Policy-based automation and assurance for wired and wireless

SD-Access Embedded Wireless

C9800 Wireless Software package to enable Wireless Controller Functionality*

Network assurance and analytics
Global insights, trends, compliance, custom reports; switch 360, wired client 360; fabric and non-fabric insights; app health, app 360, app performance (loss, latency, jitter)

Other Software included (can be purchased separately)

ISE Base

ISE Plus

StealthWatch

Note: A purchase of Cisco DNA Advantage or Cisco DNA Premier per Access Point is required in order to enable the Wireless Controller functionality on Catalyst Switches

Specifications

Dimensions, Weight, Acoustic, Mean time between failures

General Specifications

 

Dimensions (H x W x D) inches

Model

Chassis only

W/ Default Power Supply

W/ 1100W Power Supply

C9300-24T

1.73 x 17.5 x 16.1

1.73 x 17.5 x 17.7

1.73 x 17.5 x 19.2

C9300-24P

1.73 x 17.5 x 16.1

1.73 x 17.5 x 17.7

1.73 x 17.5 x 19.2

C9300-24U

1.73 x 17.5 x 16.1

1.73 x 17.5 x 19.2

1.73 x 17.5 x 19.2

C9300-24UX

1.73 x 17.5 x 17.1

1.73 x 17.5 x 20.2

1.73 x 17.5 x 20.2

C9300-24UB

1.73 x 17.5 x 16.1

1.73 x 17.5 x 19.2

1.73 x 17.5 x 19.2

C9300-24UXB

1.73 x 17.5 x 17.1

1.73 x 17.5 x 20.2

1.73 x 17.5 x 20.2

C9300-48T

1.73 x 17.5 x 16.1

1.73 x 17.5 x 17.7

1.73 x 17.5 x 19.2

C9300-48P

1.73 x 17.5 x 16.1

1.73 x 17.5 x 17.7

1.73 x 17.5 x 19.2

C9300-48U

1.73 x 17.5 x 16.1

1.73 x 17.5 x 19.2

1.73 x 17.5 x 19.2

C9300-48UXM

1.73 x 17.5 x 19.1

1.73 x 17.5 x 22.2

1.73 x 17.5 x 22.2

C9300-48UN

1.73 x 17.5 x 19.1

1.73 x 17.5 x 22.2

1.73 x 17.5 x 22.2

C9300-48UB

1.73 x 17.5 x 16.1

1.73 x 17.5 x 19.2

1.73 x 17.5 x 19.2

C9300-24S

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

1.73 X 17.5 X 20.7

C9300-48S

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

1.73 X 17.5 X 20.7

C9300L-24T-4G

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-24T-4X

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-48T-4G

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-48T-4X

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-24P-4G

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-24P-4X

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-48P-4G

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

C9300L-48P-4X

1.73 X 17.5 X 16.1

1.73 X 17.5 X 17.7

1.73 X 17.5 X 19.2

 

Dimensions (H x W x D) Centimeters

Model

Chassis only

W/ Default Power Supply

W/ 1100W Power Supply

C9300-24T

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300-24P

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300-24U

4.4 x 44.5 x 40.9

4.4 x 44.5 x 48.8

4.4 x 44.5 x 48.8

C9300-24UX

4.4 x 44.5 x 43.4

4.4 x 44.5 x 51.3

4.4 x 44.5 x 51.3

C9300-48T

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300-48P

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300-48U

4.4 x 44.5 x 40.9

4.4 x 44.5 x 48.8

4.4 x 44.5 x 48.8

C9300-48UXM

4.4 x 44.5 x 48.5

4.4 x 44.5 x 56.4

4.4 x 44.5 x 56.4

C9300-48UN

4.4 x 44.5 x 48.5

4.4 x 44.5 x 56.4

4.4 x 44.5 x 56.4

C9300-24S

4.3 x 44.4 x 44.9

4.3 x 44.4 x 48.8

4.3 x 44.4 x 52.6

C9300-48S

4.3 x 44.4 x 44.9

4.3 x 44.4 x 48.8

4.3 x 44.4 x 52.6

C9300L-24T-4G

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-24T-4X

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-48T-4G

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-48T-4X

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-24P-4G

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-24P-4X

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-48P-4G

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

C9300L-48P-4X

4.4 x 44.5 x 40.9

4.4 x 44.5 x 44.9

4.4 x 44.5 x 48.8

 

Weight (with default power supply)

Model

Pounds

Kilograms

C9300-24T

16.03

7.27

C9300-24P

16.33

7.4

C9300-24U

16.63

7.54

C9300-24UX

18.18

8.25

C9300-24UB

16.63

7.54

C9300-24UXB

18.18

8.25

C9300-48T

16.43

7.45

C9300-48P

16.73

7.59

C9300-48U

17.03

7.72

C9300-48UXM

20.50

9.34

C9300-48UN

20.05

9.09

C9300-48UB

17.03

7.72

C9300-24S

16.84

7.64

C9300-48S

17.32

7.86

C9300L-24T-4G

14.93

6.78

C9300L-24T-4X

14.93

6.78

C9300L-48T-4G

15.41

7.0

C9300L-48T-4X

15.41

7.0

C9300L-24P-4G

14.99

6.81

C9300L-24P-4X

14.99

6.81

C9300L-48P-4G

15.46

7.03

C9300L-48P-4X

15.46

7.03

Mean time between failures – MTBF (hours)

C9300-24T

314,790

C9300-24P

299,000

C9300-24U

238,410

C9300-24UX

214,760

C9300-24UB

354,300

C9300-24UXB

288.520

C9300-48T

305,870

C9300-48P

277,770

C9300-48U

227,410

C9300-48UXM

202,160

C9300-48UN

198,647

C9300-48UB

337,170

C9300-24S

284,130

C9300-48S

281,920

C9300L-24T-4G

395,800

C9300L-24T-4X

387,700

C9300L-48T-4G

387,860

C9300L-48T-4X

380,080

C9300L-24P-4G

346,940

C9300L-24P-4X

340,710

C9300L-48P-4G

314,140

C9300L-48P-4X

309,020

PWR-C1-350WAC-P

1,335,012 (ranges from 1.3M to 3.1M depending on temperature, input voltage and vendor)

PWR-C1-715WAC-P

1,054,881 (ranges from 1.05M to 2.6M depending on temperature, input voltage and vendor)

PWR-C1-1100WAC-P

1,217,904 (ranges from 1.2M to 2.8M depending on temperature, input voltage and vendor) (investigating an anomaly in MTBF data received from 1 Power Supply vendor – Artesyn)

C9300-NM-2Q

10,778,230

C9300-NM-2Y

7,568,820

C9300-NM-4G

8,953,570

C9300-NM-4M

10,549,060

C9300-NM-8X

7,151,930

FAN-T2

4,521,330

Environmental ranges

Acoustic noise

Measured per ISO 7779 and declared per ISO 9296

Bystander positions operating to an ambient temperature of 25°C

With AC power supply (with 24 PoE+ ports loaded for C9300 SKUs)

  • LpA: 45dB typical, 48 dB max
  • LwA: 5.6B typical, 5.9B max

    With AC power supply (with half the number of PoE+ ports loaded for C9300L SKUs)

  • LpA: 44dB typical, 47 dB max
  • LwA: 5.5B typical, 5.8B max

    Typical: Noise emission for a typical configuration

    Maximum: Statistical maximum to account for variation in production

  • Connectors

    Connectors and cabling

  • 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
  • Multigigabit-T ports: RJ-45 connectors, 4-pair Cat 5E, Cat 6, Cat 6A UTP cabling
  • 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
  • SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
  • SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
  • QSFP+ transceivers: MPO and LC fiber connectors (single-mode or multimode fiber)
  • QSFP+ connector
  • SFP+ connector
  • Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
  • Cisco StackPower: Cisco proprietary power stacking cables
  • Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
  • Management console port: RJ-45-to-DB9 cable for PC connections
  • Power connectors

  • Customers can provide power to a switch by using the internal power at the back of the switch
  • Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet
  • Management and standards support

    Description

    Specification

     

    Management

    BRIDGE-MIB

    CISCO-BRIDGE-EXT-MIB

    CISCO-BULK-FILE-MIB

    CISCO-CABLE-DIAG-MIB

    CISCO-CALLHOME-MIB

    CISCO-CEF-MIB

    CISCO-CIRCUIT-INTERFACE-MIB

    CISCO-CONFIG-COPY-MIB

    CISCO-CONFIG-MAN-MIB

    CISCO-DEVICE-LOCATION-MIB

    CISCO-DHCP-SNOOPING-MIB

    CISCO-EIGRP-MIB

    CISCO-EMBEDDED-EVENT-MGR-MIB

    CISCO-ENTITY-FRU-CONTROL-MIB

    CISCO-ENTITY-SENSOR-MIB

    CISCO-ENTITY-VENDORTYPE-OID-MIB

    CISCO-ERR-DISABLE-MIB

    CISCO-FLASH-MIB

    CISCO-FLOW-MONITOR-MIB

    CISCO-FTP-CLIENT-MIB

    CISCO-HSRP-EXT-MIB

    CISCO-HSRP-MIB

    CISCO-IETF-BFD-MIB

    CISCO-IETF-PPVPN-MPLS-VPN-MIB

    CISCO-IETF-PW-MPLS-MIB

    CISCO-IF-EXTENSION-MIB

    CISCO-IGMP-FILTER-MIB

    CISCO-IMAGE-LICENSE-MGMT-MIB

    CISCO-IMAGE-MIB

    CISCO-IP-CBR-METRICS-MIB

    CISCO-IP-STAT-MIB

    CISCO-IP-TAP-MIB

    CISCO-IP-URPF-MIB

    CISCO-IPSEC-FLOW-MONITOR-MIB

    CISCO-IPSEC-MIB

    CISCO-IPSEC-PROVISIONING-MIB

    CISCO-IPSLA-AUTOMEASURE-MIB

    CISCO-IPSLA-ECHO-MIB

    CISCO-IPSLA-JITTER-MIB

    CISCO-L2-CONTROL-MIB

    CISCO-L2L3-INTERFACE-CONFIG-MIB

    CISCO-LAG-MIB

    CISCO-LICENSE-MGMT-MIB

    CISCO-LOCAL-AUTH-USER-MIB

    CISCO-MAC-NOTIFICATION-MIB

    CISCO-MDI-METRICS-MIB

    CISCO-MEDIA-METRICS-MIB

    CISCO-MEMORY-POOL-MIB

    CISCO-MPLS-LSR-EXT-STD-MIB

    CISCO-NBAR-PROTOCOL-DISCOVERY-MIB

    CISCO-NHRP-EXT-MIB

    CISCO-NTP-MIB

    CISCO-PAGP-MIB

    CISCO-PORT-SECURITY-MIB

    CISCO-PORT-STORM-CONTROL-MIB

    CISCO-POWER-ETHERNET-EXT-MIB

    CISCO-PRIVATE-VLAN-MIB

    CISCO-PROCESS-MIB

    CISCO-PRODUCTS-MIB

    CISCO-RF-MIB

    CISCO-RTP-METRICS-MIB

    CISCO-RTTMON-ICMP-MIB

    CISCO-STACKWISE-MIB

    CISCO-STP-EXTENSIONS-MIB

    CISCO-SYSLOG-MIB

    CISCO-TCP-MIB

    CISCO-UDLDP-MIB

    CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB

    ENTITY-MIB

    HC-ALARM-MIB

    HC-RMON-MIB

    IEEE8023-LAG-MIB

    IF-MIB

    IP-FORWARD-MIB

    IP-MIB

    LLDP-EXT-MED-MIB

    LLDP-MIB

    MAU-MIB

    MPLS-L3VPN-STD-MIB

    MPLS-LSR-STD-MIB

    MPLS-VPN-MIB

    OLD-CISCO-CHASSIS-MIB

    OLD-CISCO-CPU-MIB

    OLD-CISCO-INTERFACES-MIB

    OLD-CISCO-IP-MIB

    OLD-CISCO-MEMORY-MIB

    OLD-CISCO-SYS-MIB

    OLD-CISCO-TCP-MIB

    OLD-CISCO-TS-MIB

    POWER-ETHERNET-MIB

    RFC1213-MIB

    RMON-MIB

    RMON2-MIB

    SMON-MIB

    SNMPv2-MIB

    SONET-MIB

    TCP-MIB

    UDP-MIB

    Standards

    EEE 802.1s

    IEEE 802.1w

    IEEE 802.1x

    IEEE 802.1x-Rev

    IEEE 802.3ad

    IEEE 802.3af

    IEEE 802.3at

    IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports

    IEEE 802.1D Spanning Tree Protocol

    IEEE 802.1p CoS prioritization

    IEEE 802.1Q VLAN

    IEEE 802.3 10BASE-T specification

    IEEE 802.3u 100BASE-TX specification

    IEEE 802.3ab 1000BASE-T specification

    IEEE 802.3z 1000BASE-X specification

    IEEE 802.3bz Multirate 2.5G/5G specification

    IEEE 802.3an 10G BASE-T specification

    Power supply specifications

    Description

    Specification

     

    PWR-C1-1100WAC-P

    PWR-C1-715WAC-P

    PWR-C1-350WAC-P

    PWR-C1-715WDC

    Power supply rated maximum

    1100W

    715W

    350W

    715W

    Total output BTU (note: 1000 BTU/hr = 293W)

    3754 BTU/hr, 1100W

    2440 BTU/hr, 715W

    1194 BTU/hr, 350W

    2440 BTU/hr

    Input-voltage range and frequency

    115V to 240 VAC,

    50 to 60 Hz

    100 to 240 VAC,

    50 to 60 Hz

    100 to 240 VAC,

    50 to 60 Hz

    -36V to -72 VDC

    Input current

    12-6A

    10-5A

    4-2A

    24-12A

    Output ratings

    -56V at 19.64A

    -56V at 12.8A

    -56V at 6.25A

    -56V at 12.8A

    Output holdup time

    20 ms minimum at 100VAC

    20 ms minimum at 100VAC

    20 ms minimum at 100VAC

    2 ms minimum at

    -48Vdc

    Power-supply input receptacles

    IEC 320-C16

    (IEC60320-C16)

    IEC 320-C16

    (IEC60320-C16)

    IEC 320-C14

    (IEC60320-C14)

    Right angle barrier style terminal block

    Power cord rating

    15A

    15A

    10A

    25A@100VDC

    Physical specifications

    (H x W x D): 1.58 x 3.25 x 13.7 in

    Weight: 3.1 lb (1.4 kg)

    (H x W x D): 1.58 x 3.25 x 12.20 in

    Weight: 2.6 lb (1.2 kg)

    (H x W x D): 1.58 x 3.25 x 12.20 in

    Weight: 2.3 lb (1.2 kg)

    (H x W x D): 1.58 x 3.25 x 12.20 in

    Weight: 2.2 lb (1kg)

    Power specifications – platinum rated power supplies

    Description

    Specification

     

    *PWR-C1-1100WAC-P

    *PWR-C1-715WAC-P

    PWR-C1-350WAC-P

    Power supply rated maximum

    1100W

    715W

    350W

    Total output BTU
    (note: 1000 BTU/hr = 293W)

    3754 BTU/hr, 1100W

    2440 BTU/hr, 715W

    1194 BTU/hr, 350W

    Input-voltage range and frequency

    115V to 240 VAC,

    50 to 60 Hz

    100 to 240 VAC,

    50 to 60 Hz

    100 to 240 VAC,

    50 to 60 Hz

    Input current

    12-6A

    10-5A

    4-2A

    Output ratings

    -56V at 19.64A

    -56V at 12.8A

    -56V at 6.25A

    Output holdup time

    20 ms minimum at 100VAC

    20 ms minimum at 100VAC

    20 ms minimum at 100VAC

    Power-supply input receptacles

    IEC 320-C16

    (IEC60320-C16)

    IEC 320-C16

    (IEC60320-C16)

    IEC 320-C14

    (IEC60320-C14)

    Power cord rating

    15A

    15A

    10A

    Physical specifications

    (H x W x D): 1.58 x 3.25 s 13.7 in

    Weight: 3.1 lb (1.4 kg)

    (H x W x D): 1.58 x 3.25 x 12.20 in

    Weight: 2.6 lb (1.2 kg)

    (H x W x D): 1.58 x 3.25 x 12.20 in

    Weight: 2.3 lb (1.2 kg)

    Operating temperature

    Normal operating temperature* and altitudes:

    • -5°C to +45°C, up to 5000 feet (1500m)
    • -5°C to +40°C, up to 10,000 feet (3000m)

    * Minimum ambient temperature for cold start is 32°F (0°C)

    Short-term* exceptional conditions:

    • -5°C to +50°C, up to 5000 feet (1500m)
    • -5°C to +45°C, up to 10,000 feet (3000m)
    • -5°C to +45°C, at sea level with single fan failure

    * Not more than following in one-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences

    Storage temperature

    -40° to 158°F (-40° to 70°C)

    Relative humidity operating and nonoperating noncondensing

    5% to 90% noncondensing

    Altitude

    10,000 ft. (3000 meters), up to 45°C

    EMI and EMC compliance

    FCC Part 15 (CFR 47) Class A

    ICES-003 Class A

    EN 55032 Class A

    CISPR 32 Class A

    AS/NZS 3548 Class A

    BSMI Class A (AC input models only)

    VCCI Class A

    EN 55024, EN300386, EN 61000-3-2, EN 61000-3-3

    EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1

    Safety compliance

     

    LED indicators

    “AC OK”: Input power to the power supply is OK

    “PS OK”: Output power from the power supply is OK

    * PWR-C1-1100WAC-UP is available as an PSU upgrade option to 1100W primary PSU

    * PWR-C1-715WAC-UP is available as an PSU upgrade option to 715W primary PSU

    Power consumption of standalone 9300 Series Switches

    Table 20 shows the power consumption of standalone Cisco Catalyst 9300 Series Switches based on Alliance for Telecommunications Industry Solutions (ATIS) testing using Internet Mix (IMIX) distribution stream traffic, with input voltage of 115VAC at 60 Hz and no PoE loading. The values given are the maximum possible power consumption numbers under the respective test scenarios.

    Safety and compliance information

    Description

    Specification

    Safety certifications

  • UL 60950-1
  • CAN/CSA-C222.2 No. 60950-1
  • EN 60950-1
  • IEC 60950-1
  • AS/NZS 60950.1
  • IEEE 802.3
  • Electromagnetic emissions certifications

  • 47 CFR Part 15
  • CISPR22 Class A
  • EN 300 386 V1.6.1
  • EN 55022 Class A
  • EN 55032 Class A
  • CISPR 32 Class A
  • EN61000-3-2
  • EN61000-3-3
  • ICES-003 Class A
  • TCVN 7189 Class A
  • V-3 Class A
  • CISPR24
  • EN 300 386
  • EN55024
  • TCVN 7317
  • V-2/2015.04
  • V-3/2015.04
  • CNS13438
  • KN32
  • KN35
  • IEC 61000-6-1
  • EN 61000-6-1

    Additional Certifications for C9300L SKUs:

  • QCVN 118:2018/BTTTT
  • CISPR24/25
  • CISPR 32 Class A

     

  • VCCI-CISPR 32 Class A

     

     

  • EN55035

     

  • Environmental

    Reduction of Hazardous Substances (ROHS) 5

    12 tháng


    Sản phẩm xem thêm


    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port data only switch, with Network Advantage

    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port data only switch, with Network Advantage

    Cisco Cisco Catalyst 9300 24-port data only switch, with Network Advantage

    Giá: Liên hệ
    Xem chi tiết
    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port PoE+ switch, with Network Advantage

    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port PoE+ switch, with Network Advantage

    Cisco Catalyst 9300 24-port PoE+ switch, with Network Advantage

    Giá: Liên hệ
    Xem chi tiết
    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port PoE+ switch, with Network Essentials

    Thiết bị chuyển mạch Cisco Catalyst 9300 24-port PoE+ switch, with Network Essentials

    Cisco Catalyst 9300 24-port PoE+ switch, with Network Essentials

    Giá: Liên hệ
    Xem chi tiết
    Thiết bị chuyển mạch Cisco Catalyst 9300 48-port modular uplinks data only, Network Advantage

    Thiết bị chuyển mạch Cisco Catalyst 9300 48-port modular uplinks data only, Network Advantage

    Cisco Catalyst 9300 48-port modular uplinks data only, Network Advantage

    Giá: Liên hệ
    Xem chi tiết

    Bình luận sản phẩm

    Khách hàng
    • ASTI
    • Bao nguoi lao dong
    • gigamall
    • HDE
    • Konica
    • makita
    • sasi
    • saf viet
    • tbh
    • thu vien tt tp
    • vinut
    • diabell
    • grobest
    • hankook
    • viet dung
    • visam
    Thông tin www.thietbicisco.vn

    Chủ sở hữu Website http://thietbicisco.vn/ thuộc về:

    CÔNG TY TRÁCH NHIỆM HỮU HẠN THƯƠNG MẠI DỊCH VỤ KẾT NỐI MẠNG

    Tên quốc tế: KET NOI MANG SERVICE TRADING COMPANY LIMITED

    Tên viết tắt: KET NOI MANG SERVICE TRADING CO.,LTD

    Số chứng nhận ĐKKD: 0314815571

    Ngày cấp: 03/01/2018, nơi cấp: Sở KH & ĐT TPHCM

    Người đại diện: VĂN NHẬT TÂN

    Địa chỉ: Số 36/34 Đường Nguyễn Gia Trí, Phường 25, Quận Bình Thạnh, Thành phố Hồ Chí Minh, Việt Nam

    Địa chỉ giao dịch: 1061 Phạm Văn Đồng, Phường Linh Tây, Thành Phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam

    Điện thoại: 84.028.35125568

    Hotline: 09 014 014 86

    Websitehttp://ketnoimang.vnhttp://thietbifortinet.vnhttp://thietbicisco.vnhttp://knmrack.vn

    Email: sales@ketnoimang.vn

    Bản đồ