Hỗ trợ trực tuyến
0901401486
Eric Van - 09 014 014 86
eric.van@ketnoimang.vn
Hỗ trợ kỹ thuật
0901401486
-
cs@ketnoimang.vn
Facebook
Xem nhiều nhất
Transceivers MFELX1 100BASE-LX SFP transceiver for single-mode fiber supports up to 15 km

Transceivers MFELX1 100BASE-LX SFP transceiver for single-mode fiber supports up to 15 km

P/N: MFELX1
Thông tin chung:

100BASE-LX SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 15 km


Liên hệ ngay
09 014 014 86 | 0978 696 818


 

Easily connect switches with fiber-optic networking modules

Highlights

- Adds fiber-optic connectivity to Cisco 100 to 500 Series switches

- High-performance link for connecting networks within a building or small business area

- Easy removal with an integrated spring latch

- Hot swappable to maintain network availability

- Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate”

Product overview

Cisco® MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) transceivers are easy-to-install modules that provide a simple way to add fiber connectivity or an extra Gigabit Ethernet port to your Cisco 100, 200, 300, and 500 Series switches. The transceivers are available for single-mode or multimode fiber-optic cabling and can support distances from 100 meters up to 40 kilometers.

The Cisco MGE transceivers provide fast, reliable connectivity between switches located on different floors, in separate buildings, or on a small campus network needing connectivity between sites. These transceivers can support Gigabit Ethernet applications. Figures 1 and 2 show the fiber-optic and copper transceivers. Table 1 lists the transceiver modules.

Figure 1. Cisco optical Gigabit Ethernet SFP module

Figure 2. Cisco 1000BASE-T copper SFP

Table 1. MGE SFP transceiver modules

Model

Description

MGBLH1

1000BASE-LH SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 40 km

MGBLX1

1000BASE-LX SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 10 km

MGBSX1

1000BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 500 m

MGBT1

1000BASE-T SFP transceiver for Category 5 copper wire, supports up to 100 m

Features

- Built-in spring latch for easy module removal

- Hot swappable

- Low-insertion-loss duplex LC receptacle

- Low electromagnetic interference (FCC Part 15, Class B) for clear communications

- Meets FDA and International Electrotechnical Commission (IEC) eye safety standards

Cisco limited warranty

The Cisco Small Business transceivers come with a 5-year limited hardware warranty with return-to-factory replacement. In addition, Cisco offers software updates for bug fixes at no charge for the life of the warranty and 1 year of telephone technical assistance from the Small Business Support Center.

The Cisco MGE SFP transceivers are supported across a variety of Cisco Small Business switches.

- 110 Series Unmanaged Switches

- 220 Series Smart Switches

- 250 Series Smart Switches

- 350 Series Managed Switches

- 350X Series Stackable Managed Switches

- 550X Series Stackable Managed Switches

Connecting the Transceiver

- Optical SFPs use a small laser to generate the fiber-optic signal.
- Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare into open apertures. Keep the optical transmit and receive ports covered whenever a cable is not connected to the port.

Connecting the Cisco MGBBX1, MFEBX1, MGBLX1, MFEFX1, MFELX1, MGBSX1, and MGBLH1

STEP 1: Insert the mini-GBIC SFP module with the printed side up and the rubber port cap facing out.

STEP 2: Remove the mini-GBIC SFP module’s rubber port cap.

STEP 3: Connect the fiber cable’s LC connector to the mini-GBIC SFP module’s port.

STEP 4: Connect the other end of the cable to an SFP module to verify that the fiber connection is complete.

Connecting the Cisco MGBT1

STEP 1: Insert the gigabit SFP module with the printed side up and the pull tab facing out.

STEP 2: Lock the gigabit SFP module in place.

STEP 3: Connect the cable to the gigabit SFP Module’s port.

STEP 4: Connect the other end of the cable to the switch.

Removing the Transceiver

Removing the Cisco MGBBX1, MFEBX1, MGBLX1, MFEFX1, MFELX1, MGBSX1, and MGBLH1

- Optical SFPs use a small laser to generate the fiber-optic signal.

- Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare into open apertures. Keep the optical transmit and receive ports covered whenever a cable is not connected to the port.

STEP 1: Press the fiber cable’s connector and pull to remove the fiber cable from the mini-GBIC SFP module.

STEP 2: Pull the module’s bail latch down.

STEP 3: Remove the mini-GBIC SFP module.

Removing the Cisco MGBT1

STEP 1: Press the RJ-45 connector’s tab and pull to remove the cable from the gigabit SFP module.

STEP 2:
To remove the gigabit SFP module, begin by pulling the module’s pull tab.

STEP 3: Remove the Gigabit SFP Module.

Specifications

Media

MGBLH1: Single-mode fiber (SMF)

MGBLX1: Single-mode fiber (SMF)

MGBSX1: Multimode fiber (MMF)

MGBT1: Category 5e Unshielded Twisted Pair (UTP)

Application

MGBLH1: 1000BASE-LH

MGBLX1: 1000BASE-LX

MGBSX1: 1000BASE-SX

MGBT1: 1000BASE-T

Connector type

MGBLH1: Duplex LC

MGBLX1: Duplex LC

MGBSX1: Duplex LC

MGBT1: RJ-45

Wavelength typical (Tx)

MGBLH1: 1310 nm

MGBLX1: 1310 nm

MGBSX1: 850 nm

MGBT1: N/A

Wavelength range (Rx)

MGBLH1: 1310 nm

MGBLX1: 1310 nm

MGBSX1: 850 nm

MGBT1: N/A

Performance

Maximum distance

MGBLH1: Up to 40 km

MGBLX1: Up to 10 km

MGBSX1: Up to 500 m

MGBT1: Up to 100 m

Average output power

MGBLH1: -4 dBm to 0 dBm

MGBLX1: -9.5 dBm to -3 dBm

MGBSX1: -9.5 dBm to -4 dBm

MGBT1: N/A

Receiver sensitivity

MGBLH1: -25 dBm (typ)

MGBLX1: -20 dBm (typ)

MGBSX1: -20 dBm (typ)

MGBT1: N/A

Receiver overload

MGBLH1: -3 dBm

MGBLX1: -3 dBm

MGBSX1: -0 dBm

MGBT1: N/A

Environmental

Dimensions W x H x D

MGBLH1: 13.4 x 8.5 x 56.5 mm (0.53 x 0.33 x 2.22 in.)

MGBLX1: 13.4 x 8.5 x 55.7 mm (0.53 x 0.33 x 2.19 in.)

MGBSX1: 13.4 x 8.5 x 56.5 mm (0.53 x 0.33 x 2.22 in.)

MGBT1: 13.4 x 8.5 x 66 mm (0.53 x 0.33 x 2.60 in.)

Unit weight

0.018 kg (0.63 oz)

Power

1W (max)

Operating temperature

32º to 158ºF (0º to 70ºC)

Storage temperature

-40º to 185ºF (-40º to 85ºC)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

Standards

Compliance

FCC Part 15 Class B

EN55022 Class B (CISPR 22B)

VCCI Class B

Safety

FDA 21 CFR 1040.10 and 1040.11

EN60950, EN (IEC) 60825-1, 2

Package contents

- Cisco SFP transceiver

- Quick start guide

Minimum requirements

- Switch with SFP port. Consult the module’s Quick Start Guide for interoperability guidelines.
Model
Number
MFEBX1/
MFEFX1/
MFELX1
Model
Number
MFEBX1/
MFEFX1/
MFELX1
SR224G
Not supported
SF102-24
Not supported
SR2024C
Not supported
SG102-24
Not supported
SR2024
Not supported
SG100-24
Not supported
SPS208G
1.0.2
SG300-20
All versions
SPS224G4
1.0.2
SG300-28
All versions
SPS2024
1.0.2
SG300-28P
All versions
SRW208G
1.0.4
SG300-52
All versions
SRW208L
1.0.4
SF300-24
All versions
SRW208P
1.0.4
SF300-24P
All versions
SRW208MP
1.0.4
SF300-48
All versions
SRW2008
1.0.4
SF300-48P
All versions
SRW2008P
1.0.4
SG300-10
All versions
SRW2008MP
1.2.2b
SG300-10P
All versions
SRW224G4
1.2.2b*
SG300-10MP
All versions
SRW248G4
1.2.4*
SF302-08
All versions
SRW224G4P
1.2.4
SF302-08P
All versions
SRW248G4P
1.0.4
SF302-08MP
All versions
SRW2024P
1.2.2
ESW520
All versions
SRW2016
Not supported
ESW540
All versions
SRW2024
Not supported
ESW520-8P
All versions
SRW2048
Not supported
ESW540-8P
All versions
SRW224P
Not supported
SF200-24
All versions
SFE2000
3.0.0.17
SF200-24P
All versions
SFE2000P
3.0.0.17
SF200-48
All versions
SGE2000
3.0.0.17
SF200-48P
All versions
SGE2000P
3.0.0.17
SG200-18
All versions
SFE2010
2.0.1.75
SG200-26
All versions
SGE2010
1.0.2
SG200-26P
All versions
SLM224G2-CN
1.0.1
SG200-50
All versions
SLM224G
1.0.1
SG200-50P
All versions
SLM248G
1.0.1
SF200E-24
All versions
SLM224P
1.0.1
SF200E-24P
All versions
SLM248P
1.0.1
SF200E-48
All versions
SLM2024
1.0.1
SF200E-48P
All versions
SLM2048
1.0.1
SLM224G4S
1.0.1
SLM248G4S
1.0.4

Bảo hánh 12 tháng.


Sản phẩm xem thêm


Transceivers MFEBX1 100BASE-BX-20U SFP transceiver for single-mode fiber supports up to 20 km

Transceivers MFEBX1 100BASE-BX-20U SFP transceiver for single-mode fiber supports up to 20 km

100BASE-BX-20U SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 20 km

Giá: Liên hệ
Xem chi tiết
Transceivers MGBBX1 1000BASE-BX-20U SFP transceiver for single-mode fiber supports up to 10 km

Transceivers MGBBX1 1000BASE-BX-20U SFP transceiver for single-mode fiber supports up to 10 km

1000BASE-BX-20U SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 10 km

Giá: Liên hệ
Xem chi tiết
Transceivers MGBLH1 1000BASE-LH SFP transceiver for single-mode fiber supports up to 40 km

Transceivers MGBLH1 1000BASE-LH SFP transceiver for single-mode fiber supports up to 40 km

1000BASE-LH SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 40 km

Giá: Liên hệ
Xem chi tiết
Transceivers MGBLX1 1000BASE-LX SFP transceiver for single-mode fiber supports up to 10 km

Transceivers MGBLX1 1000BASE-LX SFP transceiver for single-mode fiber supports up to 10 km

1000BASE-LX SFP transceiver for single-mode fiber, 1310 nm wavelength, supports up to 10 km

Giá: Liên hệ
Xem chi tiết

Bình luận sản phẩm

Khách hàng
  • ASTI
  • Bao nguoi lao dong
  • gigamall
  • HDE
  • Konica
  • makita
  • sasi
  • saf viet
  • tbh
  • thu vien tt tp
  • vinut
  • diabell
  • grobest
  • hankook
  • viet dung
  • visam
Thông tin www.thietbicisco.vn

Chủ sở hữu Website http://thietbicisco.vn/ thuộc về:

CÔNG TY TRÁCH NHIỆM HỮU HẠN THƯƠNG MẠI DỊCH VỤ KẾT NỐI MẠNG

Tên quốc tế: KET NOI MANG SERVICE TRADING COMPANY LIMITED

Tên viết tắt: KET NOI MANG SERVICE TRADING CO.,LTD

Số chứng nhận ĐKKD: 0314815571

Ngày cấp: 03/01/2018, nơi cấp: Sở KH & ĐT TPHCM

Người đại diện: VĂN NHẬT TÂN

Địa chỉ: Số 36/34 Đường Nguyễn Gia Trí, Phường 25, Quận Bình Thạnh, Thành phố Hồ Chí Minh, Việt Nam

Địa chỉ giao dịch: 1061 Phạm Văn Đồng, Phường Linh Tây, Thành Phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam

Điện thoại: 84.028.35125568

Hotline: 09 014 014 86

Websitehttp://ketnoimang.vnhttp://thietbifortinet.vnhttp://thietbicisco.vnhttp://knmrack.vn

Email: sales@ketnoimang.vn

Bản đồ