Hỗ trợ trực tuyến
0901401486
Eric Van - 09 014 014 86
eric.van@ketnoimang.vn
Hỗ trợ kỹ thuật
0901401486
-
cs@ketnoimang.vn
Facebook
Xem nhiều nhất
Thiết bị Cisco Meraki Catalyst CW9166D1-MR Cloud-managed Directional 802.11ax Compatible Access Point

Thiết bị Cisco Meraki Catalyst CW9166D1-MR Cloud-managed Directional 802.11ax Compatible Access Point

P/N: CW9166D1-MR
Thông tin chung:

Cisco Meraki Catalyst 9166D1 AP (W6E, tri-band 4x4) w/MERAKI


Liên hệ ngay
09 014 014 86 | 0978 696 818


 

Meet the high-density, high-performance Cisco Catalyst Wireless 9166D1 Access Point with an integrated directional antenna.

Ultra High Performance Wi-Fi 6E wireless

Tri-band 802.11ax-compatible access point with separate radios dedicated to security, RF management, and Bluetooth® coupled with a USB port for added connectivity options.

Software configurable flex radio architecture for 6 GHz support

The Cisco Catalyst Wireless 9166 supports a software-defined flex radio which can be operated in either a 5 GHz or 6 GHz mode. This provides an option to operate the AP in either a dual 5 GHz configuration or a true tri-band configuration.

Tri-band configuration unlocks the use of the new spectrum in the 6 GHz frequency range, which provides additional channels to increase throughput and reduce interference and noise from legacy devices. 6 GHz support ensures that the CW9166 supports future technologies.

High-Performance 802.11ax compatible wireless

The CW9166 is a cloud-managed 4x4:4 802.11ax compatible access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, retail shops, and hotels, the CW9166 offers high throughput, enterprise-grade security, and simple management.

The CW9166 provides a maximum of 7.78 Gbps* aggregate frame rate with concurrent 2.4 GHz, 5 GHz, and 6 GHz radios. A dedicated fourth radio provides real-time WIDS/WIPS with automated RF optimization, and a fifth integrated IoT radio delivers Bluetooth scanning and beaconing.

With the combination of cloud management, high-performance hardware, multiple radios, and advanced software features, the CW9166 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice (Cisco WebEx) and high-definition video.

CW9166 and Meraki cloud management

Management of the CW9166 is through the Meraki cloud, with an intuitive browser-based interface that enables rapid deployment without time-consuming deployment complexity and time-consuming staging process. Since the CW9166 is self-configuring and managed over the web, it can be deployed at a remote location in a matter of minutes, even without on-site IT staff.

24x7 monitoring via the Meraki cloud delivers real-time alerts if the network encounters problems. Remote diagnostic tools enable immediate troubleshooting over the web so that distributed networks can be managed with a minimum of hassle.

The CW9166’s firmware is automatically kept up to date via the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web. This means no manual software updates to download or missing security patches to worry about.

Product highlights

  • Four 4:4 MU-MIMO 802.11ax, up to 7.8 Gbps tri-radio aggregate frame rate
  • 2.4 GHz, 5 GHz, and 6 GHz radios; dual-band scanning radio; Bluetooth® Low Energy/IoT radio
  • Directional antenna: 2.4+5 GHz: 6 dBi gain (70x70 deg), 6 GHz: 8 dBi (60x60)
  • Full-time Wi-Fi location tracking
  • PoE: 802.3at and .3bt compliant

 

Category Specifications
Radios
  • 2.4 GHz 802.11b/g/n/ax client access radio
  • 5 GHz 802.11a/n/ac/ax client access radio
  • 6 GHz 802.11ax client access radio
  • 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
  • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios
Antenna
  • CW9166I
    • 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth
    • 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
    • 5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
    • 6 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • CW9166D1
    • 2.4 GHz: Peak gain 6 dBi, directional antenna, (70x70)
    • 5 GHz: Peak gain 6 dBi, directional antenna, (70x70)
    • 5 GHz (XOR): Peak gain 8 dBi, directional antenna, (60x60)
    • 6 GHz: Peak gain 8 dBi, directional antenna, (60x60)
802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabilities
  • UL/DL-OFDMA
  • Target Wait Time (TWT)
  • BSS coloring*
  • SU-MIMO and DL MU-MIMO support
  • Maximal ratio combining (MRC)
  • 802.11ax beamforming
  • 20 and 40 MHz* channels (802.11n)
  • 20, 40*, 80 MHz channels (802.11ac Wave 2)
  • 20, 40*, 80 and 160MHz channels (802.11ax)
  • Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands
  • Packet aggregation - A-MPDU (transmit and receive), A-MSDU (transmit and receive)

Note: *40MHz channels are supported only in 5 & 6 GHz bands.

Interfaces
  • 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
  • 1x DC power connector (8 mm, center positive)
  • USB 2.0 at 4.5W

Note:

  • Console - Only available in DNA Mode
  • Environmental Interfaces - Only available in DNA Mode
Mounting
  • All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
  • Articulating Arm (CW-MNT-ART2-00 optional)
  • Desktop, ceiling, wall, and pole mount capable
  • Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes
Physical security
  • Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
  • Kensington lock
Environment
  • CW9166I
    • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
    • Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m)
    • Operating temperature: 32° to 122°F (0° to 50°C)
    • Operating humidity: 10% to 90% (non-condensing)
    • Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
  • CW9166D1
    • Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
    • Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m)
    • Operating temperature: -4° to 122°F (-20° to 50°C)
    • Operating humidity: 10% to 90% (noncondensing)
    • Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)
  • Reliability Mean Time Between Failure (MTBF):
    • 1,128,980 hrs at 77°F (25°C) operating temperature
    • 289,596 hrs at 122°F (50°C) operating temperature
    Physical Dimensions
  • CW9166I
    • 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)
    • Weight: 3.54 lb. (1.60 kg)
  • CW9166D1
    • 9.5 x 9.5 x 2.28 in (241.3 x 241.3 x 57.9 mm)
    • Weight: 3.50 lb (1.59 kg)
  • Security
    • Integrated Layer 7 firewall with mobile device policy management
    • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
    • Flexible guest access with device isolation
    • VLAN tagging (802.1q) and tunneling with IPsec VPN
    • PCI compliance reporting
    • WPA2-PSK, WPA2-Enterprise, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)
    • EAP Local authentication - EAP-TTLS/PAP, PEAP-GTC, EAP-TLS
    • Advanced Encryption Standard (AES)
    • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
    • Cisco ISE integration for Guest access and BYOD Posturing
    Quality of Service
    • Advanced Power Save (U-APSD)
    • WMM Access Categories with DSCP and 802.1p support
    • Layer 7 application traffic identification and shaping
    Mobility
    • PMK, OKC, & 802.11r for fast Layer 2 roaming
    • Distributed or centralized layer 3 roaming
    Analytics
    • Embedded location analytics reporting and device tracking
    • Global L7 traffic analytics reporting per network, per device, & per application
    LED Indicators
    • 1 power/booting/firmware upgrade status
    Regulatory
    • RoHS
    Warranty
    • Indoor access point
    • Lifetime hardware warranty with advanced replacement included
    Power
    • Power over Ethernet: 42.5 - 57 V (PoE+ and UPoE compliant)
    • DC Power Adapter (54V)
    • Power requirement USB: Up to 30.5W (UPOE)
    • Power requirement No USB: Up to 25W (PoE+)
    • Power over Ethernet injector and DC adapter sold separately

    Note: Actual power consumption may vary depending on the AP usage

    CW9166D1
    Power Source 2.4 GHz radio 5 GHz radio 6 GHz radio Link speed USB Maximum PoE Power consumption
    802.3bt (UPOE) 4x4 4x4 4x4 5Gbps Y (4.5W) 30.5 W
    802.3at (PoE+) 4x4 4x4 4x4 5Gbps N 25 W
    802.3af (PoE)
    DC Power 4x4 4x4 4x4 5Gbps Y

    Note: It is recommended that you ensure that LLDP is enabled to allow proper power negotiation
    802.3af PoE is not supported

     

    Compliance and Standards

    Category Standard
    IEEE Standards
    • 802.3 ab/bz
    • 802.3 af/at/bt
    • 802.11a/b/g/n/ac/ax
    • 802.11d/h/i/k/r/u/v/w
    Certifications
    • Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
    • Bluetooth SIG: Bluetooth Low Energy
    Safety Approvals
    • CSA and CB 60950 & 62368
    • EN 60601 certified
    • Conforms to UL 2043 (Plenum Rating)
    Radio Approvals
    • FCC Part 15C
    • 15E RSS-247 (Canada)
    • EN 300 328 ( v2.1.1)
    • EN 301 893 (v2.1.1)
    • AS/NZS 4268 (Australia/NZ)
    • NOM-121 (Mexico)
    • NCC LP0002 (Taiwan)
    EMI Approvals (Class B)
    • FCC Part 15B
    • ICES-003 (Canada)
    • EN 301 489-1-17
    • EN 55032
    • EN 55024 (Europe)
    • CISPR 32 (Australia/NZ) VCCI (Japan)
    Exposure Approvals
    • FCC Part 2 RSS-102 (Canada)
    • EN 50385
    • EN 6231
    • EN 62479 (Europe)
    • AS/NZS 2772 (Australia/NZ)
    Wi-Fi 6E Indoor Access Points
    CW9166D1-MR

    Cisco Meraki Catalyst 9166D1 AP (W6E, tri-band 4x4) w/MERAKI

    • Note: Meraki access point license required

    Enterprise Cloud Controller Licensing and Renewal Licensing

    LIC-ENT-1YR Cisco Meraki Enterprise Cloud Controller License, 1 Year
    LIC-ENT-3YR Cisco Meraki Enterprise Cloud Controller License, 3 Year
    LIC-ENT-5YR Cisco Meraki Enterprise Cloud Controller License, 5 Year
    LIC-ENT-7YR Cisco Meraki Enterprise Cloud Controller License, 7 Year
    LIC-ENT-10YR Cisco Meraki Enterprise Cloud Controller License, 10 Year

    Adavnce Licenses

    LIC-MR-ADV-1Y Cisco Meraki Advance License, 1 Year
    LIC-MR-ADV-3Y Cisco Meraki Advance License, 3 Year
    LIC-MR-ADV-5Y Cisco Meraki Advance License, 5 Year
    Adavnced License Upgrade & Support
    LIC-MR-UPGR-1Y Meraki MR Advanced License Upgrade and Support, 1 Year
    LIC-MR-UPGR-3Y Meraki MR Advanced License Upgrade and Support, 3 Year
    LIC-MR-UPGR-5Y Meraki MR Advanced License Upgrade and Support, 5 Year
    PoE Injector
    MA-PWR-30W-XX Meraki AC Adapter for MR Series
    MA-INJ-6 Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
    AIR-PWRINJ-6 Cisco AIR-PWRINJ-6 802.3at
    AIR-PWRINJ-7 Cisco AIR-PWRINJ-7 802.3bt
    Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)

    12 tháng


    P/N Tên sản phẩm
    MR56-HW Thiết bị mạng Cisco Meraki MR56 MR56-HW Wi-Fi 6 Indoor AP
    MR36-HW Thiết bị mạng Cisco Meraki MR36 MR36-HW Wi-Fi 6 Indoor AP
    MR44-HW Thiết bị mạng Cisco Meraki MR44 MR44-HW WiFi 6 Indoor AP
    MR46-HW Thiết bị mạng Cisco Meraki MR46 MR46-HW Wi-Fi 6 Indoor AP
    MR46E-HW Thiết bị mạng Cisco Meraki MR46E MR46E-HW Wi-Fi 6 Indoor AP
    MR20-HW Thiết bị Cisco Meraki MR20 MR20-HW Cloud Managed AP
    MR45-HW Thiết bị mạng Cisco Meraki MR45 MR45-HW Cloud Managed Indoor AP
    MR30H-HW Thiết bị mạng Cisco Meraki MR30H MR30H-HW Cloud Managed AP
    MR33-HW Thiết bị mạng Cisco Meraki MR33 MR33-HW Cloud Managed AP
    MR42-HW Thiết bị Cisco Meraki MR42 MR42-HW Cloud Managed AP
    MR42E-HW Thiết bị mạng Cisco Meraki MR42E MR42E-HW Indoor AP
    MR52-HW Thiết bị mạng Cisco Meraki MR52 MR52-HW Cloud Managed AP
    MR53-HW Thiết bị mạng Cisco Meraki MR53 MR53-HW Cloud Managed AP
    MR53E-HW Thiết bị mạng Cisco Meraki MR53E MR53E-HW Cloud Managed AP
    MR28-HW Thiết bị Cisco Meraki MR28 Cloud Managed 802.11ax AP
    CW9162I-MR Thiết bị Cisco Meraki Catalyst CW9162I Cloud Managed 802.11ax Compatible AP
    CW9164I-MR Thiết bị Cisco Meraki CW9164I cloud-managed 802.11ax compatible AP
    CW9166I-MR Thiết bị Cisco Meraki CW9166I Cloud Managed 802.11ax Compatible AP
    MR36H-HW Thiết bị Cisco Meraki MR36H Cloud Managed 802.11ax AP
    MR57-HW Thiết bị Cisco Meraki MR57 cloud-managed 802.11a-compatible AP
    CW9166D1-MR Thiết bị Cisco Meraki Catalyst CW9166D1-MR Cloud-managed Directional 802.11ax Compatible Access Point

    Sản phẩm xem thêm



    Bình luận sản phẩm

    Khách hàng
    • ASTI
    • Bao nguoi lao dong
    • gigamall
    • HDE
    • Konica
    • makita
    • sasi
    • saf viet
    • tbh
    • thu vien tt tp
    • vinut
    • diabell
    • grobest
    • hankook
    • viet dung
    • visam
    Thông tin www.thietbicisco.vn

    Chủ sở hữu Website http://thietbicisco.vn/ thuộc về:

    CÔNG TY TRÁCH NHIỆM HỮU HẠN THƯƠNG MẠI DỊCH VỤ KẾT NỐI MẠNG

    Tên quốc tế: KET NOI MANG SERVICE TRADING COMPANY LIMITED

    Tên viết tắt: KET NOI MANG SERVICE TRADING CO.,LTD

    Số chứng nhận ĐKKD: 0314815571

    Ngày cấp: 03/01/2018, nơi cấp: Sở KH & ĐT TPHCM

    Người đại diện: VĂN NHẬT TÂN

    Địa chỉ: Số 36/34 Đường Nguyễn Gia Trí, Phường 25, Quận Bình Thạnh, Thành phố Hồ Chí Minh, Việt Nam

    Địa chỉ giao dịch: 1061 Phạm Văn Đồng, Phường Linh Tây, Thành Phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam

    Điện thoại: 84.028.35125568

    Hotline: 09 014 014 86

    Websitehttp://ketnoimang.vnhttp://thietbifortinet.vnhttp://thietbicisco.vnhttp://knmrack.vn

    Email: sales@ketnoimang.vn

    Bản đồ