Cisco SNTC-8X5XNBD Catalyst 2960L 48 port GigE, 4 x 1G SFP
Cisco Catalyst 2960-L Switches come with an Enhanced Limited Lifetime Warranty (E-LLW). The E-LLW provides the same terms as the Cisco standard limited lifetime warranty but adds next-business-day delivery of replacement hardware, where available, and 90 days of 8x5 Cisco Technical Assistance Center (TAC) support. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For more information about warranty terms, visit https://www.cisco.com/go/warranty and see Table 3. Warranty terms.
Cisco enhanced limited lifetime hardware warranty |
|
Device covered |
Applies to all Cisco Catalyst 2960-L Series Switches and 2960-L Smart Managed Switches. |
Warranty duration |
As long as the original end user continues to own or use the product. |
End-of-life policy |
In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance. |
Hardware replacement |
Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-L replacement part for next-business-day delivery, where available. Otherwise, a replacement will be shipped within 10 working days after the receipt of the RMA request. Actual delivery times might vary depending on customer location. |
Effective date |
Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco). |
TAC support |
Cisco will provide during customer's local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 2960-L product. This support does not include solution or network-level support beyond the specific device under consideration. |
Cisco.com access |
Warranty allows guest access only to Cisco.com. |
Product specifications (Table 2) apply to both PoE and non-PoE models.
*Routes, ACEs, and multicast group scale listed below are available starting with Cisco IOS Software Release 15.2(6)E. See the release notes for more information.
|
8 port |
16 port |
24 port (1/10G uplinks) |
48 port (1/10G uplinks) |
||||||
Console ports |
||||||||||
RJ45 Ethernet |
1 |
1 |
1 |
1 |
||||||
USB mini-B |
1 |
1 |
1 |
1 |
||||||
USB-A port for storage and Bluetooth console |
1 |
1 |
1 |
1 |
||||||
Memory and processor |
||||||||||
CPU |
ARMv7 800 MHz |
ARMv7 800 MHz |
ARMv7 800 MHz |
ARMv7 800 MHz |
||||||
DRAM |
512 MB |
512 MB |
512 MB |
512 MB |
||||||
Flash memory |
256 MB |
256 MB |
256 MB |
256 MB |
||||||
Performance |
||||||||||
Forwarding bandwidth |
10 Gbps |
18 Gbps |
1G: 28 Gbps 10G: 64 Gbps |
1G: 52 Gbps 10G: 88Gpbs |
||||||
Switching bandwidth |
20 Gbps |
36 Gbps |
1G: 56 Gbps 10G: 128 Gbps |
1G: 104 Gbps 10G: 176 Gbps |
||||||
Unicast MAC addresses |
16000 |
16000 |
16000 |
16000 |
||||||
IPv4 unicast direct routes |
512 |
512 |
512 |
512 |
||||||
IPv4 unicast indirect routes |
256 |
256 |
256 |
256 |
||||||
IPv6 unicast direct routes |
414 |
414 |
414 |
414 |
||||||
IPv6 unicast indirect routes |
128 |
128 |
128 |
128 |
||||||
IPv4 multicast routes and IGMP groups |
1024 |
1024 |
1024 |
1024 |
||||||
IPv6 multicast groups |
1024 |
1024 |
1024 |
1024 |
||||||
IPv4/MAC security ACEs |
384 |
384 |
384 |
384 |
||||||
IPv6 security ACEs |
256 |
256 |
256 |
256 |
||||||
Maximum active VLANs |
256 |
256 |
256 |
256 |
||||||
VLAN IDs available |
4094 |
4094 |
4094 |
4094 |
||||||
Maximum STP instances |
64 |
64 |
64 |
64 |
||||||
Maximum SPAN sessions |
4 |
4 |
4 |
4 |
||||||
Jumbo Ethernet frame |
10,240 bytes |
10,240 bytes |
10,240 bytes |
10,240 bytes |
||||||
MTBF in hours (data) |
2,448,133 |
2,416,689 |
2,412,947 |
1,370,769 |
||||||
MTBF in hours (PoE) |
315,044 |
313,496 |
909,838 |
437,970 |
Environment |
||||||||||
Operating temperature |
||||||||||
Up to 5,000 ft (1500 m) |
23ºF to 113ºF |
23ºF to 113ºF |
23ºF to 113ºF |
23ºF to 113ºF |
||||||
WS-C2960L-16PS-LL has maximum operating temperature of 40°C (up to 5,000 ft) and 35°C (up to 10,000 ft). |
||||||||||
Up to 10,000 ft (3000 m) |
23ºF to 104ºF |
23ºF to 104ºF |
23ºF to 104ºF |
23ºF to 104ºF |
||||||
Operating altitude |
10,000 ft (3000 m) |
10,000 ft (3000 m) |
10,000 ft (3000 m) |
10,000 ft (3000 m) |
||||||
Operating relative humidity |
5% to 90% at 40ºC |
5% to 90% at 40ºC |
5% to 90% at 40ºC |
5% to 90% at 40ºC |
||||||
Storage temperature |
–13º to 158ºF |
–13º to 158ºF |
–13º to 158ºF |
–13º to 158ºF |
||||||
Storage altitude |
15,000 ft (4500 m) |
15,000 ft (4500 m) |
15,000 ft (4500 m) |
15,000 ft (4500 m) |
||||||
Storage relative humidity |
5% to 95% at 65ºC |
5% to 95% at 65ºC |
5% to 95% at 65ºC |
5% to 95% at 65ºC |
||||||
Storage altitude |
Note: Minimum ambient temperature for cold start is 0°C (32°F). |
|||||||||
Electrical |
Data |
PoE |
Data |
PoE |
Data |
PoE |
Data |
PoE |
||
Voltage (auto ranging) |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
110 to 220V AC in |
||
Frequency |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
||
Current |
0.13A to 0.22A |
0.22A to 0.27A |
0.16A to 0.26A |
0.24A to 0.28A |
0.20A to 0.33A |
0.21A to 0.26A |
0.29A to 0.48A |
0.37A to 0.64A |
||
Power rating |
0.04 kVA |
0.11 kVA |
0.05 kVA |
0.19 kVA |
0.06 kVA |
0.24 kVA |
0.09 kVA |
0.48 kVA |
||
Power consumption (watts) |
||||||||||
0% traffic |
13.0 |
19.9 |
14.9 |
21.9 |
1G: 16.5 |
1G: 17.52 |
1G: 24.36 |
1G: 27.24 |
||
10G: 17.04 |
10G: 16.68 |
10G: 25.8 |
10G: 27 |
|||||||
10% traffic |
14.8 |
22.0 |
19.3 |
27.1 |
1G: 23.04 |
1G: 24 |
1G: 33 |
1G: 39.24 |
||
10G: 22.92 |
10G: 23.16 |
10G: 38.04 |
10G: 39.12 |
|||||||
100% traffic |
14.9 |
22.0 |
19.3 |
27.1 |
1G: 23.64 |
1G: 24 |
1G: 33.6 |
1G: 40.32 |
||
10G: 23.64 |
10G: 23.76 |
10G: 39.36 |
10G: 40.56 |
|||||||
Weighted average |
14.2 |
21.3 |
17.8 |
25.4 |
1G: 21.06 |
1G: 21.84 |
1G: 30.32 |
1G: 35.6 |
||
10G: 21.2 |
10G: 21.2 |
10G: 34.4 |
10G: 35.56 |
|||||||
|
Note: The wattage rating on the power supply does not represent actual power draw. It indicates the maximum power draw possible by the power supply. This rating can be used for facility capacity planning. For PoE switches, cooling requirements are smaller than total power draw because a significant portion of the load is dissipated in the endpoints. |
Acoustic noise (48-port PoE only) |
||||||||||
Sound pressure |
LpA (typical) |
35 dB |
||||||||
LpAD (maximum) |
39 dB |
|||||||||
Sound power |
LwA (typical) |
4.8 B |
||||||||
LwAD (maximum) |
5.2 B |
|||||||||
Note: Bystander positions operating mode at 77°F (25°C) ambient. |
||||||||||
Safety and compliance |
||||||||||
Safety |
UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
|||||||||
EMC: emissions |
47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
|||||||||
EMC: immunity |
EN55024 (including EN 61000-4-5), CISPR24, EN300386, KN24 |
|||||||||
Environmental |
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
|||||||||
Telco |
Common Language Equipment Identifier (CLEI) code |
|||||||||
U.S. government certifications |
USGv6 and IPv6 Ready Logo |
|||||||||
Connectors and interfaces |
||||||||||
Ethernet interfaces |
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling |
|||||||||
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling |
||||||||||
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
||||||||||
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
||||||||||
Indicator LEDs |
Per-port status: link integrity, disabled, activity, speed, and full duplex |
|||||||||
System status: system, PoE, and link speed |
||||||||||
Console cables |
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
|||||||||
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors |
||||||||||
Power |
Use the supplied AC power cord to connect the AC power connector to an AC power outlet |
|||||||||
Management |
||||||||||
|
BRIDGE-MIB CISCO-CABLE-DIAG-MIB CISCO-CDP-MIB CISCO-CLUSTER-MIB CISCO-CONFIG-COPY-MIB CISCO-CONFIG-MAN-MIB CISCO-DHCP-SNOOPING-MIB CISCO-ENTITY-VENDORTYPE-OID-MIB CISCO-ENVMON-MIB CISCO-ERR-DISABLE-MIB CISCO-FLASH-MIB CISCO-FTP-CLIENT-MIB CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB CISCO-IP-STAT-MIB CISCO-LAG-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MEMORY-POOL-MIB CISCO-PAGP-MIB CISCO-POE-EXTENSIONS-MIB |
CISCO-PORT-QOS-MIB CISCO-PORT-SECURITY-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-PRODUCTS-MIB CISCO-PROCESS-MIB CISCO-RTTMON-MIB CISCO-SMI-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOG-MIB CISCO-TC-MIB CICSO-TCP-MIB CISCO-UDLDP-MIB CISCO-VLAN-IFTABLE CISCO-VLAN-MEMBERSHIP-MIB CISCO-VTP-MIB ENTITY-MIB ETHERLIKE-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB |
IF-MIB INET-ADDRESS-MIB OLD-CISCO-CHASSIS-MIB OLD-CISCO-FLASH-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB RFC1213-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-MPD-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMPv2-MIB TCP-MIB UDP-MIB |
|||||||
For an updated list of supported MIBs, refer to the MIB Locator at cisco.com/go/mibs. |
||||||||||
Standards |
||||||||||
|
IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab (LLDP) Bluetooth Ver 4.0 |
IEEE 802.3ad IEEE 802.3af and IEEE 802.3at IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX |
IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X RMON I and II standards SNMP v1, v2c, and v3 IEEE 802.3az IEEE 802.3ae 10 Gigabit Ethernet IEEE 802.1ax |
|||||||
RFC compliance |
||||||||||
|
RFC 768 - UDP RFC 783 - TFTP RFC 791 - IP RFC 792 - ICMP RFC 793 - TCP RFC 826 - ARP RFC 854 - Telnet RFC 951 - Bootstrap Protocol (BOOTP) RFC 959 - FTP RFC 1112 - IP Multicast and IGMP RFC 1157 - SNMP v1 RFC 1166 - IP Addresses |
RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery RFC 1305 - NTP RFC 1492 - TACACS+ RFC 1493 - Bridge MIB RFC 1542 - BOOTP extensions RFC 1901 - SNMP v2C RFC 1902-1907 - SNMP v2 RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6 FRC 2068 - HTTP RFC 2131 - DHCP RFC 2138 - RADIUS RFC 2233 - IF MIB v3 |
Cisco Catalyst 2960-L Switches come with an Enhanced Limited Lifetime Warranty (E-LLW). The E-LLW provides the same terms as the Cisco standard limited lifetime warranty but adds next-business-day delivery of replacement hardware, where available, and 90 days of 8x5 Cisco Technical Assistance Center (TAC) support. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For more information about warranty terms, visit https://www.cisco.com/go/warranty and see Table 3. Warranty terms.
Cisco enhanced limited lifetime hardware warranty |
|
Device covered |
Applies to all Cisco Catalyst 2960-L Series Switches and 2960-L Smart Managed Switches. |
Warranty duration |
As long as the original end user continues to own or use the product. |
End-of-life policy |
In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance. |
Hardware replacement |
Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-L replacement part for next-business-day delivery, where available. Otherwise, a replacement will be shipped within 10 working days after the receipt of the RMA request. Actual delivery times might vary depending on customer location. |
Effective date |
Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco). |
TAC support |
Cisco will provide during customer's local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 2960-L product. This support does not include solution or network-level support beyond the specific device under consideration. |
Cisco.com access |
Warranty allows guest access only to Cisco.com. |
Cisco Catalyst 2960-L Series Switches support term-based Cisco DNA Essentials licenses (Cisco DNA Essential). Table 4 lists the features supported in Cisco DNA Essentials. Table 5 gives ordering information for Cisco DNA Essentials with the 2960-L Series.
Ordering and managing licenses with smart accounts: Creating smart accounts by using the Cisco Smart Software Manager (SSM) enables you to order devices and licensing packages and also to manage your software licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notified of expiring add-on licenses that you want to renew. When the license term expires, you can either renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to continue operating with the base license capabilities.
Table 3. Features supported in Cisco DNA Essentials for Cisco Catalyst 2960-L Series Switches
Category |
Features |
Day-zero network bring-up automation |
Cisco Network Plug-and-Play application |
Cisco DNA Center |
Discovery, inventory, topology, software image management |
Network monitoring |
Device 360 |
Customers with enhanced version of Cisco IOS LAN Lite software feature sets are provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards as long as the original end user continues to own or use the product or up to 1 year from the end-of-sale date for this product, whichever occurs earlier.
This policy supersedes any previous warranty or software statement and is subject to change without notice.
Technical Support and Services
Table 4 describes available technical services.
Table 4. Technical services available for Cisco Catalyst 2960-L Switches
Technical services |
Cisco Smart Net Total Care Service |
Cisco Smart Foundation Service |
Cisco Smart Care Service |
Cisco SP Base Service |
Cisco Focused Technical Support Services Three levels of premium, high-touch services are available: Valid Cisco Smart Net Total Care or SP Base contracts are required on all network equipment. |
1. Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment is initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with Next-Business-Day (NBD) delivery. Where NBD is not available, same-day shipping is provided. Restrictions apply for details, review the appropriate service descriptions.
2. Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set.
12 tháng
Cisco Catalyst 2960L 24 port GE with PoE, 4 x 1G SFP, LL, Asia Pac
Cisco Catalyst 2960L 48 port GE with PoE, 4 x 1G SFP, LL, Asia Pac
Catalyst 2960L 16 port GigE with PoE, 2 x 1G SFP, LAN Lite
Catalyst 2960L 8 port GigE with PoE, 2 x 1G SFP, LAN Lite
Chủ sở hữu Website http://thietbicisco.vn/ thuộc về:
Tên quốc tế: KET NOI MANG SERVICE TRADING COMPANY LIMITED
Tên viết tắt: KET NOI MANG SERVICE TRADING CO.,LTD
Số chứng nhận ĐKKD: 0314815571
Ngày cấp: 03/01/2018, nơi cấp: Sở KH & ĐT TPHCM
Người đại diện: VĂN NHẬT TÂN
Địa chỉ: Số 36/34 Đường Nguyễn Gia Trí, Phường 25, Quận Bình Thạnh, Thành phố Hồ Chí Minh, Việt Nam
Địa chỉ giao dịch: 1061 Phạm Văn Đồng, Phường Linh Tây, Thành Phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam
Điện thoại: 84.028.35125568
Hotline: 09 014 014 86
Website: http://ketnoimang.vn | http://thietbifortinet.vn | http://thietbicisco.vn | http://knmrack.vn
Email: sales@ketnoimang.vn